System Hardware Details from PowerShell
To Pull System Hardware Details from Powershell
Step 1
Install the JumpCloud Module on your Powershell
( Windows/ MAC )
Install JumpCloud on Windows.
Open Powershell as Administrator.
Run this cmd -> Set-ExecutionPolicy -ExecutionPolicy RemoteSigned
Next this cmd -> Install-Module JumpCloud
If you are stuck anywhere refer to this LINK
If you are having trouble then reach out to support@netnxt.com
Install JumpCloud on MAC.
Download the Powershell From this LINK according to your device.
Powershell will be installed from the above step.
Open the Powershell and run this -> Install-Module JumpCloud
If you are stuck anywhere refer to this LINK
If you are having trouble then reach out to support@netnxt.com
Step 2
Connect your Powershell to JumpCloud by the below instructions
Open Powershell in Administrator
Run this cmd to connect JumpCloud -> Connect-JCOnline
Provide the API Key
Note - If you generate the API key store it in a safe place and use it when it is needed. Do not generate it again as a result your previous key will be expired.
Below is the instruction to pull the System Hardware Details of all the devices
Run the below command to get System Hardware details for devices.
To export to CSV.
Related Articles
Pull All Local Account Details from All Devices
Pull All Local Account Details from All Devices Step 1 Install the JumpCloud Module on your Powershell ( Windows/ MAC ) Install JumpCloud on Windows. Open Powershell as Administrator. Run this cmd -> Set-ExecutionPolicy -ExecutionPolicy RemoteSigned ...Add & Remove the device in Device Group in bulk via Powershell
? Summary This article explains how to bulk add or remove systems from a JumpCloud system group using the Jumpcloud Powershell Module and a .csv file. ✅ Prerequisites Step 1 Install the JumpCloud Module on your Powershell ( Windows/ MAC ) Install ...Add users to a user group in bulk Using a CSV File from PowerShell
Add Users to a User Group in Bulk using Powershell Step 1 Install the JumpCloud Module on your Powershell ( Windows/ MAC ) Install JumpCloud on Windows. Open Powershell as Administrator. Run this cmd -> Set-ExecutionPolicy -ExecutionPolicy ...Set password expiration for users currently marked as 'Password Never Expires' in bulk (User Group Base) from Powershell
Set password expiration for users currently marked as 'Password Never Expires' in bulk Step 1 Install the JumpCloud Module on your Powershell ( Windows/ MAC ) Install JumpCloud on Windows. Open Powershell as Administrator. Run this cmd -> ...LAPS (Local Admin Password Solution) for Windows "JC miniLAPS"
? Overview To implement JumpCloud MiniLAPS, a lightweight Local Administrator Password Solution (LAPS) for Windows devices managed by JumpCloud. This solution rotates and securely stores the local admin password within JumpCloud system description. ...